LeadPipesCheck

Sandy Ridge Subdivision, TX

Lead detected, under the action levels

Latest 90th-percentile lead: 0.24 ppb (monitoring period 2022-2024). The federal action level is 15 ppb today and drops to 10 ppb in Nov 2027; EPA's health goal is 0. Lead was measured in sampled homes but the 90th percentile is under both action levels. EPA's health goal for lead is zero, so test your own tap if your home was built before 1986 or anyone in it is pregnant or a young child.

Sandy Ridge Subdivision at a glance

Sandy Ridge Subdivision serves about 60 people through 20 service connections, which makes it a very small system under EPA's size classes. It is privately owned and draws groundwater, in Brazoria County, Texas. EPA system ID: TX0200255; phone on file: 512-990-4400. Call that number and ask whether your address has a lead, galvanized or unknown service line.

Lead results over time

The highest 90th-percentile result EPA holds for Sandy Ridge Subdivision is 0.24 ppb across 1 monitoring period, none of them over 15 ppb.

Period ending90th-percentile lead
20240.24 ppb

How Sandy Ridge Subdivision compares

Of the 4,447 Texas systems with a lead result, the median latest reading is 0.28 ppb; 15 are over 15 ppb right now and 202 have gone over at some point. Sandy Ridge Subdivision's 0.24 ppb sits at the 50th percentile in Texas and the 41st nationally (higher means more lead).

Other water systems in Brazoria County

155 other systems share Brazoria County; 67 of them have a higher latest lead result than Sandy Ridge Subdivision. If you are unsure which one supplies your house, the name on your water bill decides it.

SystemPeopleLatest lead
City Of Pearland125,8282.1 ppb
City Of Lake Jackson27,3140 (not detected)
City Of Alvin26,2440 (not detected)
City Of Angleton19,4292.04 ppb
City Of Clute10,6040 (not detected)
City Of Freeport10,5940 (not detected)
City Of Iowa Colony9,978-
City Of Manvel8,4370 (not detected)
City Of Richwood7,6052.26 ppb
Brazoria County Mud 66,9260.7 ppb

Next steps for Austin, TX

Test your own tap with a certified lab first-draw sample; Austin, TX may offer free or low-cost kits through the utility. If your own line is lead, replacing the private side runs about $1,200-$12,300 (EPA average about $4,700). Ask Sandy Ridge Subdivision whether it covers that cost before hiring anyone - many utilities now do.

These figures describe homes the utility sampled, not your tap. Only your service line record or a test of your own water answers the question for your house. The lead result guide covers how utilities pick the homes they sample. Size matters more than most people expect: small vs large water systems.