Revere, MN
Lead detected, under the action levels
Latest 90th-percentile lead: 2 ppb (monitoring period 2024-2026). The federal action level is 15 ppb today and drops to 10 ppb in Nov 2027; EPA's health goal is 0. Lead was measured in sampled homes but the 90th percentile is under both action levels. EPA's health goal for lead is zero, so test your own tap if your home was built before 1986 or anyone in it is pregnant or a young child.
Who runs the water here
Revere serves about 95 people through 41 service connections, which makes it a very small system under EPA's size classes. It is owned by a local government (city, town, county or district) and draws groundwater, in Redwood County, Minnesota. EPA system ID: MN1640010; phone on file: 5078296003. They can tell you what your service line is made of and whether they pay to replace it.
Revere's lead record
That is down 5 ppb from 7 ppb in the period ending 2023. The highest 90th-percentile result EPA holds for Revere is 7 ppb across 5 monitoring periods, none of them over 15 ppb.
| Period ending | 90th-percentile lead |
|---|---|
| 2026 | 2 ppb |
| 2023 | 7 ppb |
| 2022 | 7 ppb |
| 2021 | 0 (not detected) |
| 2020 | 2 ppb |
Against other Minnesota systems
Of the 966 Minnesota systems with a lead result, the median latest reading is 0 ppb; 7 are over 15 ppb right now and 48 have gone over at some point. Revere's 2 ppb sits at the 66th percentile in Minnesota and the 70th nationally (higher means more lead).
Neighbouring systems
13 other systems share Redwood County; 6 of them have a higher latest lead result than Revere. If you are unsure which one supplies your house, the name on your water bill decides it.
| System | People | Latest lead |
|---|---|---|
| Redwood Falls | 5,254 | 7 ppb |
| Morgan | 896 | 3 ppb |
| Lamberton | 828 | 2 ppb |
| Walnut Grove | 825 | 0 (not detected) |
| Wabasso | 735 | 3 ppb |
| Sanborn | 339 | 0 (not detected) |
| Vesta | 319 | 0 (not detected) |
| Belview | 300 | 1 ppb |
| Milroy | 252 | 4 ppb |
| Lucan | 210 | 1 ppb |
Next steps for Revere, MN
Test your own tap with a certified lab first-draw sample; Revere, MN may offer free or low-cost kits through the utility. If your own line is lead, replacing the private side runs about $1,200-$12,300 (EPA average about $4,700). Ask Revere whether it covers that cost before hiring anyone - many utilities now do.
These figures describe homes the utility sampled, not your tap. Only your service line record or a test of your own water answers the question for your house. Why sampled homes are the worst-case ones is in the guide to reading the number. Size matters more than most people expect: small vs large water systems.