Remsen Municipal Utilities, IA
Lead reported as not detected
Latest 90th-percentile lead: reported as 0 (not detected) (monitoring period 2026-2026). The federal action level is 15 ppb today and drops to 10 ppb in Nov 2027; EPA's health goal is 0. The latest 90th-percentile result was reported as 0 (not detected at the lab's limit). That says the sampled homes were low, not that your home has no lead service line. Check your utility's service line inventory for your address.
Who runs the water here
Remsen Municipal Utilities serves about 1,678 people through 696 service connections, which makes it a small system under EPA's size classes. It is owned by a local government (city, town, county or district) and draws groundwater, in Plymouth County, Iowa. EPA system ID: IA7568079; phone on file: 712-540-6554. Ask them for your address in their service line inventory - every system had to publish one by Oct 2024.
Remsen Municipal Utilities's lead record
Against the period ending 2025 (0 ppb) the latest result is about the same. The highest 90th-percentile result EPA holds for Remsen Municipal Utilities is 6 ppb across 10 monitoring periods, none of them over 15 ppb.
| Period ending | 90th-percentile lead |
|---|---|
| 2026 | 0 (not detected) |
| 2025 | 0 (not detected) |
| 2022 | 2.8 ppb |
| 2021 | 1.3 ppb |
| 2020 | 3.3 ppb |
| 2020 | 0 (not detected) |
| 2019 | 0 (not detected) |
| 2019 | 3 ppb |
| 2018 | 6 ppb |
| 2017 | 0 (not detected) |
Where this result ranks
Of the 1,066 Iowa systems with a lead result, the median latest reading is 1.4 ppb; 4 are over 15 ppb right now and 36 have gone over at some point. Remsen Municipal Utilities's reported as 0 (not detected) sits at the 26th percentile in Iowa and the 30th nationally (higher means more lead). Systems reporting 0 tie at the bottom, so the rank mostly reflects size among them.
Neighbouring systems
9 other systems share Plymouth County; 9 of them have a higher latest lead result than Remsen Municipal Utilities. If you are unsure which one supplies your house, the name on your water bill decides it.
| System | People | Latest lead |
|---|---|---|
| Lemars Water Department | 10,606 | 2.2 ppb |
| Akron, City Of | 1,558 | 3.6 ppb |
| Kingsley Water Supply | 1,396 | 1.1 ppb |
| Hinton Water Supply | 935 | 3.34 ppb |
| Merrill Municipal Water Supply | 717 | 3.73 ppb |
| Brunsville Municipal Water Supply | 129 | 8 ppb |
| Westfield Water Supply | 123 | 1.2 ppb |
| Oyens Water Supply | 92 | 1.3 ppb |
| Craig Water Works | 79 | 5.2 ppb |
What to do in your house
Look up your address in Remsen Municipal Utilities's service line inventory. If it says lead, galvanized or unknown, test your tap. If your own line is lead, replacing the private side runs about $1,200-$12,300 (EPA average about $4,700). Ask Remsen Municipal Utilities whether it covers that cost before hiring anyone - many utilities now do. Its latest copper 90th percentile is 1500 ppb (copper action level 1,300 ppb).
These figures describe homes the utility sampled, not your tap. Only your service line record or a test of your own water answers the question for your house. Why sampled homes are the worst-case ones is in the guide to reading the number. A zero today does not rule out a jump later - the rules are tightening in 2027.