Millville Circle/South, NH
Above the federal action level
Latest 90th-percentile lead: 111 ppb (monitoring period 2019-2021). The federal action level is 15 ppb today and drops to 10 ppb in Nov 2027; EPA's health goal is 0. In the most recent monitoring period, more than 10% of the sampled homes measured above 15 ppb. Use a filter certified to NSF/ANSI 53 for lead for drinking and cooking now, and test your own tap.
Who runs the water here
Millville Circle/South serves about 48 people through 20 service connections, which makes it a very small system under EPA's size classes. It is privately owned and draws groundwater, in Rockingham County, New Hampshire. EPA system ID: NH2052010. Ask the utility on your bill for your address in their service line inventory.
Every lead result on file
The highest 90th-percentile result EPA holds for Millville Circle/South is 111 ppb across 1 monitoring period, 1 of them over the 15 ppb action level.
| Period ending | 90th-percentile lead |
|---|---|
| 2021 | 111 ppb over 15 |
Where this result ranks
Of the 124 New Hampshire systems with a lead result, the median latest reading is 16 ppb; 62 are over 15 ppb right now and 64 have gone over at some point. Millville Circle/South's 111 ppb sits at the 95th percentile in New Hampshire and the 100th nationally (higher means more lead).
Nearby utilities
185 other systems share Rockingham County; 1 of them has a higher latest lead result than Millville Circle/South. If you are unsure which one supplies your house, the name on your water bill decides it.
| System | People | Latest lead |
|---|---|---|
| Portsmouth Water Works | 33,000 | 0 (not detected) |
| Salem Water Dept | 21,080 | 2 ppb |
| Derry Water Dept | 17,528 | 0 (not detected) |
| Seabrook Water Dept | 14,000 | 3 ppb |
| Exeter Water Dept | 12,236 | 0 (not detected) |
| Pease Trade Port | 9,900 | 0 (not detected) |
| Hampstead Area Water | 7,153 | 2 ppb |
| Londonderry | 6,255 | 4 ppb |
| Newmarket Water Works | 5,030 | 2 ppb |
| Rye Water Dist | 4,300 | 0 (not detected) |
Next steps for Salem, NH
Use a filter certified to NSF/ANSI 53 for lead on the tap you drink and cook from, now, before you test. Then test your own tap. If your own line is lead, replacing the private side runs about $1,200-$12,300 (EPA average about $4,700). Ask Millville Circle/South whether it covers that cost before hiring anyone - many utilities now do.
These figures describe homes the utility sampled, not your tap. Only your service line record or a test of your own water answers the question for your house. What a 90th-percentile result does and does not tell you: how to read a lead result. Size matters more than most people expect: small vs large water systems.