LeadPipesCheck

Marshall Community Water Assn, WA

Lead detected, under the action levels

Latest 90th-percentile lead: 1.3 ppb (monitoring period 2021-2023). The federal action level is 15 ppb today and drops to 10 ppb in Nov 2027; EPA's health goal is 0. Lead was measured in sampled homes but the 90th percentile is under both action levels. EPA's health goal for lead is zero, so test your own tap if your home was built before 1986 or anyone in it is pregnant or a young child.

Marshall Community Water Assn at a glance

Marshall Community Water Assn serves about 74 people through 30 service connections, which makes it a very small system under EPA's size classes. It is privately owned and draws groundwater, in Spokane County, Washington. EPA system ID: WA5351845. Ask the utility on your bill for your address in their service line inventory.

Marshall Community Water Assn's lead record

That is down 4.4 ppb from 5.7 ppb in the period ending 2020. The highest 90th-percentile result EPA holds for Marshall Community Water Assn is 5.7 ppb across 3 monitoring periods, none of them over 15 ppb.

Period ending90th-percentile lead
20231.3 ppb
20205.7 ppb
20170.8 ppb

Where this result ranks

Of the 2,218 Washington systems with a lead result, the median latest reading is 1 ppb; 18 are over 15 ppb right now and 62 have gone over at some point. Marshall Community Water Assn's 1.3 ppb sits at the 56th percentile in Washington and the 60th nationally (higher means more lead).

Other water systems in Spokane County

86 other systems share Spokane County; 30 of them have a higher latest lead result than Marshall Community Water Assn. If you are unsure which one supplies your house, the name on your water bill decides it.

SystemPeopleLatest lead
Spokane City Of346,1382 ppb
Whitworth Water District 226,8831.3 ppb
Vera Water & Power24,69220.8 ppb
Consolidated Irrig Dist 19 System 221,2201.3 ppb
Spo Co Water Dist 3 Sys 119,0351.6 ppb
Modern Electric Water Co18,4870 (not detected)
Eastern Washington University17,1086.5 ppb
Cheney City Of16,9541.3 ppb
Liberty Lake Sewer & Water District14,5001.5 ppb
Fairchild Air Force Base9,5444.2 ppb

Next steps for Marshall, WA

Test your own tap with a certified lab first-draw sample; Marshall, WA may offer free or low-cost kits through the utility. If your own line is lead, replacing the private side runs about $1,200-$12,300 (EPA average about $4,700). Ask Marshall Community Water Assn whether it covers that cost before hiring anyone - many utilities now do.

These figures describe homes the utility sampled, not your tap. Only your service line record or a test of your own water answers the question for your house. What a 90th-percentile result does and does not tell you: how to read a lead result. Systems that went over once often dip back under; here is what that means.