LeadPipesCheck

Janice W/A #1, MS

Lead detected, under the action levels

Latest 90th-percentile lead: 2 ppb (monitoring period 2021-2023). The federal action level is 15 ppb today and drops to 10 ppb in Nov 2027; EPA's health goal is 0. Lead was measured in sampled homes but the 90th percentile is under both action levels. EPA's health goal for lead is zero, so test your own tap if your home was built before 1986 or anyone in it is pregnant or a young child.

About Janice W/A #1

Janice W/A #1 serves about 602 people through 228 service connections, which makes it a small system under EPA's size classes. It is under mixed public and private ownership and draws groundwater, in Perry County, Mississippi. EPA system ID: MS0560007; phone on file: 601-598-2262. They can tell you what your service line is made of and whether they pay to replace it.

Lead results over time

Against the period ending 2020 (1.8 ppb) the latest result is about the same. The highest 90th-percentile result EPA holds for Janice W/A #1 is 2 ppb across 3 monitoring periods, none of them over 15 ppb.

Period ending90th-percentile lead
20232 ppb
20201.8 ppb
20170.7 ppb

Against other Mississippi systems

Of the 973 Mississippi systems with a lead result, the median latest reading is 1 ppb; 9 are over 15 ppb right now and 44 have gone over at some point. Janice W/A #1's 2 ppb sits at the 78th percentile in Mississippi and the 71st nationally (higher means more lead).

Other water systems in Perry County

9 other systems share Perry County; 4 of them have a higher latest lead result than Janice W/A #1. If you are unsure which one supplies your house, the name on your water bill decides it.

SystemPeopleLatest lead
N E Perry Utl Assn-#12,6190.6 ppb
Runnelstown-North1,9683.6 ppb
Town Of Beaumont1,1061.5 ppb
Town Of Richton9201 ppb
Little Creek Water Association6545.9 ppb
Town Of New Augusta5702.4 ppb
Arlington W/A5330.5 ppb
Arlington W/A-Hintonville4880 (not detected)
Janice W/A #2-South22713 ppb

Next steps for Brooklyn, MS

Test your own tap with a certified lab first-draw sample; Brooklyn, MS may offer free or low-cost kits through the utility. If your own line is lead, replacing the private side runs about $1,200-$12,300 (EPA average about $4,700). Ask Janice W/A #1 whether it covers that cost before hiring anyone - many utilities now do.

These figures describe homes the utility sampled, not your tap. Only your service line record or a test of your own water answers the question for your house. Why sampled homes are the worst-case ones is in the guide to reading the number. Size matters more than most people expect: small vs large water systems.