LeadPipesCheck

Curlew Water & Sewer District, WA

Lead detected, under the action levels

Latest 90th-percentile lead: 0.9 ppb (monitoring period 2023-2025). The federal action level is 15 ppb today and drops to 10 ppb in Nov 2027; EPA's health goal is 0. Lead was measured in sampled homes but the 90th percentile is under both action levels. EPA's health goal for lead is zero, so test your own tap if your home was built before 1986 or anyone in it is pregnant or a young child.

Who runs the water here

Curlew Water & Sewer District serves about 316 people through 59 service connections, which makes it a very small system under EPA's size classes. It is owned by a local government (city, town, county or district) and draws groundwater, in Ferry County, Washington. EPA system ID: WA5316900. Ask the utility on your bill for your address in their service line inventory.

Every lead result on file

Against the period ending 2022 (1.1 ppb) the latest result is about the same. The highest 90th-percentile result EPA holds for Curlew Water & Sewer District is 3.9 ppb across 4 monitoring periods, none of them over 15 ppb.

Period ending90th-percentile lead
20250.9 ppb
20221.1 ppb
20203.2 ppb
20163.9 ppb

Where this result ranks

Of the 2,218 Washington systems with a lead result, the median latest reading is 1 ppb; 18 are over 15 ppb right now and 62 have gone over at some point. Curlew Water & Sewer District's 0.9 ppb sits at the 46th percentile in Washington and the 49th nationally (higher means more lead).

Nearby utilities

10 other systems share Ferry County; 7 of them have a higher latest lead result than Curlew Water & Sewer District. If you are unsure which one supplies your house, the name on your water bill decides it.

SystemPeopleLatest lead
Republic City Of1,6732.2 ppb
Inchelium Water District5400 (not detected)
Curlew Conservation Center3493.6 ppb
Lakeside Park1801 ppb
Orient Water Company1675 ppb
Curlew Kai Homeowner Water System1331 ppb
Martin Creek Community Assn1090 (not detected)
North Twin Lakeview Assn8833.3 ppb
Riverwood Water System432 ppb
Fourth Of July Creek Estates29-

Next steps for Republic, WA

Test your own tap with a certified lab first-draw sample; Republic, WA may offer free or low-cost kits through the utility. If your own line is lead, replacing the private side runs about $1,200-$12,300 (EPA average about $4,700). Ask Curlew Water & Sewer District whether it covers that cost before hiring anyone - many utilities now do.

These figures describe homes the utility sampled, not your tap. Only your service line record or a test of your own water answers the question for your house. Why sampled homes are the worst-case ones is in the guide to reading the number. The action level is dropping - the 10 ppb rule from 2027.